| AthletEdge
Product Applications
Restraining
Athletic Surface and Asphalt over Compacted Base
Download
CSI 3-part Specifications and CAD Files
AthletEdge
Restraint Goal
-
AthletEdge is designed to allow for full and consistent material
thickness to the edge of the pavement.
- AthletEdge
helps prevent broken edges typical with unrestrained athletic
installations and provides an affordable maintainable, finished
edge.
*Application
Overview
-
AthletEdge is anchored into the compacted base using 3/8”
x 10” spiral steel spikes.
-
Asphalt base (binder) course is laid on compacted base following
AthletEdge installation instructions.
-
Athletic Surface is laid on base (binder) course following AthletEdge
installation instructions.
-
Weep holes in the sidewall of AthletEdge are located in the upper
_” of the restraint allowing drainage from the athletic
surface.
-
Semi-compact backfill material adjacent to the completed installation
providing additional support.
*Intended
as an overview only, please refer to specifier/ manufacturer technical
specifications.
Anchoring
3/8”
x 10” spiral steel spikes anchored 4” to 12” on
center depending on depth and compaction of base material.
- Anchor
at ends of each section in addition to guidelines indicated below.
-
For a shallow and/or loosely compacted base, 4” to 8”
on center spacing recommended.
- For
deeper and/or densely compacted base, 12” on center spacing
recommended.
AthletEdge Product:
AthletEdge product (height) is determined by the combined depth
of the asphalt and athletic surface.
Example: Combined depth of surfaces is 2-1/2” = 2-1/2”
AT.
Weep holes are located _” from the top of the restraint, facilitating
drainage from the athletic surface. |
