| AsphaltEdge
Product Applications
Restraining
Single Course of Asphalt over Concrete Base Asphalt
Download
CSI 3-part Specifications and CAD Files
AsphaltEdge
Restraint Goal
-
AsphaltEdge is designed to allow for full and consistent material
thickness to the edge of the pavement.
- AsphaltEdge
helps prevent broken edges typical to traditional asphalt and
provides a maintainable, finished edge to your asphalt installation.
*Application
Overview
-
Place the sidewall of the AsphaltEdge _” in from the edge
of concrete base.
- Anchor
into the outer 1” of the AsphaltEdge base or a minimum of
2” from the edge of the concrete using a Hilti or Ramset
fastening system (see anchoring below).
- Asphalt
is laid on concrete base with the asphalt adjacent to the AsphaltEdge
being laid following AsphaltEdge installation instructions.
-
Semi-compact backfill material adjacent to the completed asphalt
installation providing additional support.
*Intended
as an overview only, please refer to specifier/ manufacturer technical
specifications.
Anchoring
- Anchor
into the outer 1” of the AsphaltEdge base or a minimum of
2” from the edge of the concrete.
- Anchor
at ends of each section in addition to guidelines indicated below.
-
A Hilti DX A41 Powder Actuated Fastening System is desirable where
sufficient hold can be obtained. 3/4” to 1” nail (12”on
center) with applicable charge recommended.Contact Hilti customer
service at 800.879.8000 for details.
AsphaltEdge Product:
AsphaltEdge product (height) is determined by the depth of the asphalt.
Example; 2-1/2” of asphalt = 2-1/2” AE. |
