AsphaltEdge Product Applications
Restraining Double Course of Asphalt over Compacted Gravel Base Asphalt
Restraining Double Course of Asphalt on Compacted Gravel Base Running Track

Download CSI 3-part Specifications and CAD Files

AsphaltEdge Restraint Goal

• AsphaltEdge is designed to allow for full and consistent material thickness to the edge of the pavement.
• AsphaltEdge helps prevent broken edges typical to traditional asphalt and provides a maintainable, finished edge to your asphalt installation.

*Application Overview

• AsphaltEdge is anchored into the compacted base using 3/8” x 10” spiral steel spikes.
• Base (binder) course of asphalt is laid on compacted base following AsphaltEdge installation instructions.
• Finish course of asphalt is laid on base (binder) course following AsphaltEdge installation instructions.
• Semi-compact backfill material adjacent to the completed asphalt installation providing additional support.

*Intended as an overview only, please refer to specifier/ manufacturer technical specifications.

Anchoring
3/8” x 10” spiral steel spikes anchored 4” to 12” on center depending on depth and compaction of base material.

• Anchor at ends of each section in addition to guidelines indicated below.
• For a shallow and/or loosely compacted base, 4” to 8” on center spacing recommended.
• For deeper and/or densely compacted base, 12” on center spacing recommended.

AsphaltEdge Product:
AsphaltEdge product (height) is determined by the depth of the asphalt. Example; 2-1/2” of asphalt = 2-1/2” AE.